C Series Troubleshooting Overview Section TS - Troubleshooting Symptoms Page TS-67 Excessive Noise This is symptom tree t081-001 Cause Correction STEP 1 Drive belt is loose or has high loading ............. Check the drive belt tension. Adjust the tension if necessary. Check the accessory drive belts. Refer to Procedure 008-002. OK Go To Next Step STEP 2 Intake air or exhaust leaks ............. Refer to the Exhaust Black Smoke - Excessive symptom tree. OK Go To Next Step STEP 3 Turbocharger noise ............. Turbocharger fluttering noises can be heard during deceleration or quick throttle closing. This noise is normal. OK Go To Next Step STEP 4 Valve lash excessive .............
Adjust valves. Make sure the push rods are not bent or rocker levers not severely worn. Refer to Procedure 004-014 and 003-004. OK Go To Next Step STEP 5 Gear train backlash is excessive or the gear teeth are damaged ............. Check the gear backlash and the gear teeth. Refer to Procedure 001-023. OK Go To Next Step STEP 6 Power knock ............. Inspect rod bearings. Replace if necessary. Refer to Procedure 001-014.