Troubleshooting Overview C Series Page TS-68 Section TS - Troubleshooting Symptoms Fuel Consumption Excessive This is symptom tree t087 Cause Correction Check for added loading from malfunctioning accessories or other engine-driven units, brakes dragging, or other changes in vehicle loading. Disengage engine-driven units. STEP 1 Engine under excessive load ............. OK Go To Next Step Explain correct engine operation to the operator. Refer to Operation and Maintenance Manual, C Series Engines, Bulletin 3810248. STEP 2 Operator technique is not correct ............. OK Go To Next Step Check the fuel lines, fuel connections, fuel delivery valve seals, and fuel filters for leaks.
Check the fuel lines from the supply tank(s). Refer to the OEM service manual. STEP 3 Fuel leak ............. OK Go To Next Step Verify by operating the engine from a temporary supply of number 2 diesel fuel. Check fuel specifications for proper fuel grade. Refer to Fuel for Cummins Engines, Bulletin 3379001. STEP 4 Poor fuel quality or wrong fuel grade ............. OK Go To Next Step STEP 5 Intake and exhaust system restricted ............. Check the intake and exhaust systems for restrictions. Inspect the intake air filter and replace as necessary. Refer to Procedure 010-031. OK Go To Next Step STEP 6 Injectors worn or malfunctioning ............. Remove and test the injectors.
Replace as necessary. Refer to Procedure 006-026. OK Go To Next Step STEP 7 Fuel injection pump timing is not correct ............. Put the engine at top dead center. Check and adjust the fuel timing. Refer to Procedure 005-013. OK Go To Next Step STEP 8 Fuel injection pump is malfunctioning ............. Remove the fuel pump. Refer to Procedure 005-012. Calibrate the fuel pump. OK Go To Next Step STEP 9 Valves are not sealing correctly ............. Check and adjust the valves. Refer to Procedure 003-004.