Cummins — 3666003

C Series Camshaft Section 1 - Cylinder Block - Group 01 Page 1-31 The total pits, when added together, must not exceed a circle of 6-mm [0.236-in]. Only one pit is allowed within ±20 degrees of the nose of the cam lobe. Edge Deterioration (Breakdown) Criteria The area of edge deterioration can not be greater than the equivalent area of a 2-mm [0.079-in] circle within ±20 degrees of the nose of the cam lobe. Outside of the ±20 degrees of the nose of the cam lobe, the areas of edge deterioration can not be greater than the equivalent area of a 6-mm [0.236-in] circle.