Cummins — 3666003

C Series Camshaft Bushings Section 1 - Cylinder Block - Group 01 Page 1-39 Measure the installed diameter of the camshaft bushings. Camshaft Bushing Bore Diameter - Installed mm in 60.06 MIN 2.365 60.12 MAX 2.367 Finishing Steps WARNING Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. This component or assembly weighs greater than 23 kg [50 lb].

To prevent serious personal injury, be sure to have assistance or use appropriate lifting equipment to lift this component or assembly. WARNING Install the camshaft.Refer to Procedure 001-008 in Section 1. Install the gear cover. Refer to Procedure 001-031 in Section 1. Install the vibration damper. Refer to Procedure 001-052 in Section 1. Install the push rods. Refer to Procedure 004-014 in Section 4. Install the rocker levers. Refer to Procedure 003-008 in Section 3. Install the rocker lever cover. Refer to Procedure 003-011 in Section 3. Install the drive belt. Refer to Procedure 008-002 in Section 8. Connect the battery cables. Refer to Procedure 013-009 in Section 13.

Operate the engine and check for leaks.