Cummins — 3666003

C Series Crankshaft Section 1 - Cylinder Block - Group 01 Page 1-63 The thrust bearing journal does not have tangs or slots. Care must be taken to make sure the number stamped on the main bearing cap is positioned to the camshaft side of the engine. Lubricate the main bearing capscrew threads and underside of the capscrew head with clean engine oil. Tap the main bearing cap gently into position. NOTE: Make sure the main bearing is still aligned with the cap. When seated, the main bearing capscrews can be threaded in by hand. Tighten the main bearing capscrews evenly following the illustrated sequence. Torque Value: Step1 50 N•m [ 37 ft-lb ] Step2 95 N•m [ 70 ft-lb ] Step3 60°