Cummins — 3666003

Crankshaft Gear, Front (Crankshaft Installed) C Series Page 1-64 Section 1 - Cylinder Block - Group 01 NOTE: The crankshaft must rotate freely after the main bearings have been installed. Inspect the main bearing installations and the size of the main bearings if the crankshaft will not rotate freely. Crankshaft Gear, Front (Crankshaft Installed) (001-018) General Information The front crankshaft gear has an interference fit with the crankshaft. If the gear is damaged, the crankshaft will also be damaged. If it is necessary to replace the front crankshaft gear, the crankshaft must be replaced.

Refer to Procedure 001-016 in the Troubleshooting and Repair Manual, C8.3G, C Gas Plus, and L Gas Plus Engines, Bulletin 3666206 or Procedure 001-016 in the Troubleshooting and Repair Manual, C Series Engines, Bulletin 3666003. Inspect for Reuse Inspect the crankshaft gear for cracks and broken or chipped teeth. Remove any burrs with Scotch-Brite™ 7448 abrasive pad, Part Number 3823258.