Cummins — 3666003

Cylinder Block C Series Page 1-74 Section 1 - Cylinder Block - Group 01 NOTE: Remove the covering from the piston cooling nozzles. Remove the protective tape and cloth from the crankshaft journals. Clean the crankshaft journals. WARNING When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to avoid personal injury. Use solvent and a brush to clean any residue that possibly splashed on the camshaft. NOTE: Inspect the camshaft lobes and tappet faces for signs of wear or damage. Refer to Procedure 001-008.

Inspect for Reuse Measure the cylinder bore diameter at 25.4 mm [1 in] and 170.7 mm [5.5 in] from the top of the cylinder block. Cylinder Bore Dimensions mm in Bore Inner Diameter 114.00 MIN 4.488 114.04 MAX 4.990 Bore Out of Round 0.08 MAX 0.003 Bore Taper 0.02 MAX 0.001 NOTE: Do not proceed with in chassis overhaul if the cylinder bores are worn beyond specifications.