Cummins — 3666003

Cylinder Liner C Series Page 1-82 Section 1 - Cylinder Block - Group 01 Install When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury. WARNING WARNING Some solvents are flammable and toxic. Read the manufacturer's instructions before using. Clean all deposits and debris from the sealing surfaces (A), (B), and (C). Use Scotch-Brite® 7448, Part Number 3823258, and cleaning solvent to polish the surfaces. Due to the critical machined tolerances, care must be taken not to remove any additional material.

If surface (C) has cracks or signs of extreme wear, the counterbore will require machining and the installation of shims for the correct liner protrusion. Cylinder liner shims are available as follows: Cylinder Liner Shim Thickness - By Part Number 3924445 0.25 mm [ 0.010 in ] 3924446 0.38 mm [ 0.015 in ] 3924447 0.51 mm [ 0.020 in ] 3924448 0.76 mm [ 0.030 in ] 3924449 1.00 mm [ 0.040 in ] Use a maximum of one shim. Machine the counterbore with counterbore machining tool, Part Number 3823558; cutter plate, Part Number 3823567; and cutter bit, Part Number 3823570.