Cummins — 3666003

C Series Vibration Damper, Viscous Section 1 - Cylinder Block - Group 01 Page 1-115 Finishing Steps Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. WARNING Install the fan drive belt. Refer to Procedure 008-002 in Section 8. Connect the batteries. Refer to the OEM service manual. Operate the engine and check for noise and proper operation. Vibration Damper, Viscous (001-052) Preparatory Steps Batteries can emit explosive gases.

To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. WARNING Disconnect the batteries. Refer to the OEM service manual. Remove the drive belt. Refer to Procedure 008-002 in Section 8. Remove Remove the six capscrews. NOTE: The crankshaft speed indicator ring is part of the vibration damper assembly and must not be removed from the vibration damper. Remove the vibration damper/crankshaft speed indicator ring assembly.