C Series Piston and Connecting Rod Assembly Section 1 - Cylinder Block - Group 01 Page 1-125 Use a fine-grit hone to remove any burrs from the cylinder block head deck. Zero the dial indicator, Part Number 3823495, to the cylinder block head deck. Move the dial indicator over the piston directly over the piston pin to eliminate any side-to-side movement. Do not place the indicator tip on the anodized area. Rotate the crankshaft to top dead center. Rotate the crankshaft clockwise and counterclockwise to find the highest dial indicator reading. Record the reading. Remove the piston connecting rod assembly from the Number 1 cylinder, and install the assembly into the Number 2 cylinder.
Repeat the procedure for every cylinder using the same piston connecting rod assembly.