Cummins — 3666003

C Series Cylinder Head Section 2 - Cylinder Head - Group 02 Page 2-15 NOTE: To turn the capscrew accurately to the desired angle, orientate according to the small “dot” and “window” marked on the capscrew head, or use the torque angle gauge for Ѕ-inch drive, Part Number 3823878, or torque angle gauge for ѕ-inch drive, Part Number 3823879. Mark the cylinder head adjacent to the dot on the capscrew head. This mark will serve as an indexing aid. 5. Rotate the capscrew until the mark that has been made on the cylinder head falls into the window on the capscrew head. Pre - 1991 Certifications 1 Follow the numbered sequence and tighten all capscrews: Torque Value:

Step 1 40 N•m [ 30 ft-lb ] Step 2 150 N•m [ 111 ft-lb ] Step 3 220 N•m [ 162 ft-lb ]