Valve, Cylinder Head C Series Page 2-20 Section 2 - Cylinder Head - Group 02 NOTE: Keep the valves in a labeled rack for a correct match with the companion seats while inspecting the cylinder head. Remove the remaining collets, retainers, springs, and valves. Remove the valve stem seals. Clean Wear protective eye covering when cleaning the valves. Failing to do so can cause injury to eyes. WARNING Clean the valve heads with a soft wire wheel. NOTE: Keep the valves in a labeled rack to prevent mixing prior to making measurements. Polish the valve stem with a Scotch-Brite™ 7448 abrasive pad, Part Number 3823258, and solvent.