Valve, Cylinder Head C Series Page 2-24 Section 2 - Cylinder Head - Group 02 Lubricate the valve stems with clean SAE 90W oil. Install the valves in their original locations. Assemble the valve spring and retainer. Install and compress the valve spring retainer assembly, using valve spring compressor, Part No. 3375962. Install the valve collets and release the valve spring compressor tension. To avoid personal injury wear eye protection when installing valve collets. If the collets are not correctly installed, they can fly out when the stems are hit with the hammer. WARNING After assembly, hit the valve stems with a plastic hammer to make sure that the collets are installed properly.