C Series Rocker Lever Section 3 - Rocker Levers - Group 03 Page 3-5 Install the crankcase vent tube, and secure with the support clamps and hose clamp. Torque Value: A = 24 N•m [212 in-lb]. B = 43 N•m [32 in-lb]. Install the air crossover tube and any other parts previously removed to gain access to the valve cover. Rocker Lever (003-008) Preparatory Steps Remove the crankcase breather tube and hose. Refer to Procedure 003-018. Remove the rocker lever cover. Refer to Procedure 003-011. Loosen the adjusting screw locknuts. Loosen the adjusting screws until they stop. Remove the capscrews, retaining clamps, rocker lever assemblies, and supports.
Remove If the rocker lever and push rods are to be inspected for reuse, follow these steps. Remove the retaining rings and thrust washers.