Cummins — 3666003

C Series Fuel Injection Pumps, In-Line Section 5 - Fuel System - Group 05 Page 5-11 Remove the number 1 high-pressure fuel line from the fuel injection pump. NOTE: Lines 2 through 6 must not be removed or loosened. CAUTION When attaching the fabricated tube, do not bend the number 1 high-pressure fuel line. This can cause the inside of the fuel line to flake and cause injector failure. A short length of high-pressure line that is compatible with the fuel lines used on the engine must be bent in a “U” shape and installed onto the delivery valve holder of the fuel injection pump. The line is used to observe when the fuel is or is not flowing through the delivery valve holder assembly.

Place a container under the tube to catch the fuel or drain the fuel back into the spill port pump. Remove the overflow valve from the fuel injection pump. Install a 14-mm threaded plug and sealing washer into the fuel return port of the fuel injection pump. NOTE: The fuel return port is located on the inboard front side of the fuel injection pump for automotive in-line applications and on the outboard front side for most industrial applications Remove the fuel supply line between the fuel filter head and the fuel injection pump. Attach the high-pressure outlet hose from the spill port pump cart to the fuel injection pump supply port.