C Series Fuel Injection Pumps, In-Line Section 5 - Fuel System - Group 05 Page 5-13 Both the RQV and RQV-K governor must have the shutdown lever in the full-run position. The RSV governor throttle lever must be in the low-idle position and the shutdown lever needs to be wired or locked in the 1/2-travel position. Turn on the spill timing cart pump. Check the fuel pressure. Fuel Spill Timing Cart - Fuel Pressure kPa psi 2068 MIN 300 2551 MAX 370 NOTE: The shutdown lever must be held in the required position before turning the spill cart pump on. Fuel must be flowing out of the tube attached to the fuel injection pump. If the fuel is not flowing, check the procedures again carefully.