Fuel Injection Pumps, In-Line C Series Page 5-20 Section 5 - Fuel System - Group 05 Remove the four fuel injection pump mounting nuts. Remove the fuel injection pump. Install Automotive and Industrial Do not use the timing pin to locate engine top dead center for marine applications. This can result in incorrect timing, poor engine performance, and engine smoke problems. CAUTION Make certain that the cylinder Number 1 is at top dead center. The fuel injection pump also has a timing pin (1), located in the governor housing, to position the fuel injection pump shaft to correspond with top dead center for cylinder Number 1.
The timing pin must be reversed and stored in the housing (2) after the fuel injection pump is installed. Remove the fuel injection pump timing pin access plug.