Cummins — 3666003

C Series Air in Fuel Section 6 - Injectors and Fuel Lines - Group 06 Page 6-3 Since the fuel transfer pump provides a positive pressure through the fuel filter and supply line to the fuel injection pump, loose connections or defective seals will show as a fuel leak and not as an air leak. Vent Open the banjo bleed screw to bleed the low pressure fuel line. The pressure of the fuel in the line is sufficient to penetrate the skin and cause serious injury. WARNING To check for air in the high-pressure lines, loosen the fittings at the head. Crank the engine to allow entrapped air to bleed from the fuel line. Tighten the fittings. Torque Value:

38 N•m [ 28 ft-lb ] Do not bleed a hot engine, as this could cause fuel to spill onto a hot exhaust manifold, creating a danger of fire. CAUTION Operate the engine and bleed one fuel line at a time until the engine runs smoothly.