Cummins — 3666003

C Series Injector Section 6 - Injectors and Fuel Lines - Group 06 Page 6-19 Test While testing injectors, keep hands and body parts away from the injector nozzle. Fuel coming from the injector is under extreme pressure and can cause serious injury by penetrating the skin. WARNING WARNING The pressure of the fuel in the line is sufficient to penetrate the skin and cause serious personal injury. Wear gloves and protective clothing. Injector Opening Pressure Test All nozzles must be tested for opening pressure, chatter, and spray pattern. Inspect the injector opening pressure using injector nozzle tester, Part Number 3376946: A. Open valve. B. Operate the lever at one stroke per second. C.

Read the pressure indicated when the injector spray begins. If the opening pressure does not meet specifications: 1. Add shim(s) to increase pressure. 2. Remove shim(s) to decrease pressure. Leakage Test 1. Open valve (A). 2. Operate the lever (B) to maintain a pressure of 20 bar [290 psi] below opening pressure (C). 3. No drops can fall from the tip (D) within 10 seconds.