Injector C Series Page 6-20 Section 6 - Injectors and Fuel Lines - Group 06 Chatter Test The chatter test indicates the ability of the needle valve to move freely and atomize the fuel correctly. A sound will be heard as the valve rapidly opens and closes. A well- optimized spray pattern will be seen. Used nozzles can not be evaluated for chatter at lower speeds. A used nozzle can generally be used if it passes the leakage test. Clean and Inspect for Reuse WARNING When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury.
Rinse the nozzle bodies and needle valves in solvent to flush and remove thoroughly and completely all varnish and carbon deposits. CAUTION Never use emery paper or any other metal scraper to clean the nozzle. The parts can be damaged. Dip the nozzle seat in clean test oil, and use nozzle cleaning kit, Part Number 3376947, to clean. Polish the needle seat with the piece of hardwood dipped in the test oil. When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury. WARNING Clean the interior ring groove of the nozzle with the scraper as shown.
Rinse in solvent to remove all dirt and carbon residue and dip in clean test oil.