Injector Supply Lines (High Pressure) C Series Page 6-26 Section 6 - Injectors and Fuel Lines - Group 06 Injector Supply Lines (High Pressure) (006-051) General Information CAUTION The high-pressure fuel lines will be damaged, unless they are clamped securely and routed so they do not contact each other or any other components. The high-pressure fuel lines are designed and manufactured to deliver fuel at injection pressure to the injectors. The high-pressure pulses will cause the lines to expand and contract during the injection cycle. The length, internal size, and rigidity of the high-pressure fuel lines is critical to smooth engine operation.
An attached metal tag is used to identify each line with a part number. NOTE: Do not weld or substitute line. Use only the specified part number for the engine. The pressure of the fuel in the line is sufficient to penetrate the skin and cause serious personal injury. Wear gloves and protective clothing. WARNING Use cardboard to check for cracks and leaks in the high- pressure fuel lines. With the engine running, move the cardboard over the fuel lines and look for fuel spray on the cardboard. Fuel leaks can cause poor engine performance. Preparatory Steps Clean all debris from around the fuel lines.