Cummins — 3666003

C Series Fuel Return Overflow Valve Section 6 - Injectors and Fuel Lines - Group 06 Page 6-25 Fuel Return Overflow Valve (006-044) Remove 19-mm Wrench Remove the pressure relief valve and copper sealing washers. Clean Thoroughly flush the high-pressure relief valve with cleaning solution. Inspect for Reuse NOTE: A sticky check ball will result in low engine power. Use a small screwdriver to verify that the check ball is not sticking in the high-pressure relief valve assembly. Install Install the high-pressure relief valve assembly in the reverse order of removal. NOTE: Make sure to replace the used sealing washers with new sealing washers.