Cummins — 3666003

C Series Lubricating Oil Cooler Section 7 - Lubricating Oil System - Group 07 Page 7-3 Lubricating Oil Cooler (007-003) Preparatory Steps Coolant is toxic. Keep away from children and pets. If not reused, dispose of in accordance with local environmental regulations. WARNING WARNING Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C [120°F] before removing the pressure cap. Heated coolant spray or steam can cause personal injury. To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin. WARNING State and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity.

Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations. WARNING Drain the coolant. Refer to Procedure 008-018 in Section 8. Clean the area around the lubricating oil cooler cover. Remove the coolant filter head. Refer to Procedure 008-007 in Section 8. Remove the lubricating oil filter. Refer to Procedure 007-013 in Section 7. Remove the turbocharger oil supply line. Refer to Procedure 010-046 in Section 10. Remove Remove the lubricating oil cooler cover, gaskets, and cooler element. Discard the gaskets.