Cummins — 3666003

C Series Lubricating Oil Dipstick Tube Section 7 - Lubricating Oil System - Group 07 Page 7-7 Use care when marking the dipstick. The dipstick will break if the scribe mark is too deep. CAUTION Remove the dipstick and scribe a mark across the stick at the oil level. Label the mark with an "H" to indicate the high oil level. Lubricating Oil Dipstick Tube (007-011) Remove Clean the area around the dipstick tube before removing to prevent debris from entering the oil system. Remove the dipstick from the dipstick tube. Remove the dipstick tube from the cylinder block. Service Tip : Use a dent puller and a M8 x 1.25 x 21-mm self-tapping capscrew.

Thread the capscrew into the dipstick tube and remove the tube. Install Apply a thin bead of Loctite™ 277 around the knurled end of the dipstick tube.