Lubricating Oil Pan C Series Page 7-14 Section 7 - Lubricating Oil System - Group 07 Install the gasket and lubricating oil pan. Install the oil pan corner braces, if equipped. Assemble the washers and capscrews to secure the lubricating oil pan, as illustrated. Remove the guide pins and install the capscrews. Tighten all capscrews in the sequence shown in the accompanying chart. Torque Value: 24 N•m [ 212 in-lb ] Hand tighten all the capscrews, to secure the oil pan to the engine, before tightening the capscrews. Tight all the capscrews in the sequence shown in the illustration. Torque Value: 23 N•m [ 204 in-lb ] Finishing Steps Fill the lubricating oil system.
Refer to Procedure 007-037 in Section 7. Fill the lubricating oil system. Refer to Procedure 007-037 in Section 7. Operate the engine and check for leaks.