C Series Lubricating Oil Pump Section 7 - Lubricating Oil System - Group 07 Page 7-19 Inspect the lubricating oil pump housing and gerotor drive for damage and excessive wear. Assemble Install the gerotor planetary with the top mark in the correct position. Install Failure to fill the pump with oil during installation can result in a slow prime at initial engine start-up, resulting in severe engine damage. CAUTION Lubricate the lubricating oil pump with clean engine oil. Make sure the idler gear pin is installed in the locating bore in the cylinder block. This can damage the pump. CAUTION Install the lubricating oil pump.