Lubricating Oil System C Series Page 7-24 Section 7 - Lubricating Oil System - Group 07 Lubricating Oil System (007-037) Drain To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin. WARNING Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity. Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations. WARNING Operate the engine until the coolant temperature reaches 60°C [140°F]. Shut the engine off. Remove the oil drain plug.
Drain the oil immediately to make sure all the oil and suspended contaminants are removed from the engine. Use a container with a capacity of at least 23.6 liters [25 qt] of lubricating oil. Fill Clean and check the lubricating oil drain plug threads and sealing surface. Install the lubricating oil pan drain plug. Use a high-quality 15W-40 multiviscosity oil, such as Cummins Premium Blue, or equivalent, in Cummins engines. Choose the correct oil for your application and climate as outlined in the Operation and Maintenance Manual, or Cummins Engine Oil Recommendations, Bulletin 3810340. Torque Value N•m [ft-lb] Steel Oil Pan 80 59 Cast Aluminum Oil Pan 60 45