Cummins — 3666003

C Series Coolant Filter Section 8 - Cooling System - Group 08 Page 8-5 The valve must be in the ON position to prevent engine damage. CAUTION Open the coolant inlet and outlet valves on the coolant filter head by rotating the valves counterclockwise . Install the coolant system pressure cap. Operate the engine and check for coolant leaks. After the air has been purged from the system, check the coolant level. Do not allow oil to get into the filter. Oil will damage the DCA. CAUTION CAUTION Mechanical overtightening can distort the threads of damage the filter head. Apply a thin film of lubricating oil to the gasket sealing surface before installing the new coolant filter.

Install the coolant filter on the filter head. Tighten the filter until the gasket contacts the filter head surface. Tighten the coolant filter an additional 1/2 to 3/4 of a turn, or as specified by the filter manufacturer.