Cummins — 3666003

Coolant Filter Head C Series Page 8-6 Section 8 - Cooling System - Group 08 The valve must be in the ON position to prevent engine damage. CAUTION Turn the shutoff to the ON position by rotating the knobs in the counter-clockwise direction until the valves are fully open. Install the coolant system pressure cap. Operate the engine and check for coolant leaks. After the air has been purged from the system, check the coolant level again. Coolant Filter Head (008-007) Preparatory Steps Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C [120°F] before removing the pressure cap. Heated coolant spray or steam can cause personal injury.

WARNING WARNING Coolant is toxic. Keep away from children and pets. If not reused, dispose of in accordance with local environmental regulations. Remove the coolant filter. Refer to Procedure 008-006.