Cummins — 3666003

C Series Coolant Filter Valve Section 8 - Cooling System - Group 08 Page 8-7 Remove Remove the coolant outlet connection. NOTE: If the coolant filter head is remote mounted; refer to the OEM service manual. Install Install a new gasket and the coolant outlet connection. Tighten the thermostat housing and coolant connection capscrews. Torque Value: 24 N•m [ 18 ft-lb ] Finishing Steps Fill the cooling system. Refer to Procedure 008-018. Operate the engine and check for leaks. Coolant Filter Valve (008-009) Remove Remove the retaining capscrew (1) from the thermostat housing (2) and remove the shutoff valve (3). Remove and discard the o-ring (4).