C Series Air Intake Manifold Section 10 - Air Intake System - Group 10 Page 10-5 Air Crossover (010-019) Remove Loosen the hose clamps, and position the crossover tube so that it can be removed. Remove the tube. Inspect for Reuse Check the crossover tube for cracks, holes, and worn sections. Also check for poor sealing between the hose and tube. Inspect the clamps for wear. Replace with a new hose and clamps if necessary. Install Install the crossover tube and clamps in the reverse order of removal. Tighten the clamps. Refer to the OEM manual for torque specification. Air Intake Manifold (010-023) Preparatory Steps Disconnect the cold starting aid, if used. Refer to the OEM service manual.
Remove the air crossover tube, if used. Refer to Procedure 010-019. Disconnect the charge air cooler hose, if used. Refer to Procedure 010-027. Remove the high-pressure fuel lines. Refer to Procedure 006-051.