Cummins — 3666003

C Series Turbocharger Section 10 - Air Intake System - Group 10 Page 10-19 Use a high-intensity black light, Part Number 3163339, to inspect the turbine inlet for leaks. A yellow glow indicates an oil leak from the engine. If a yellow glow is not seen in the turbine inlet, replace the turbocharger. See the Remove and Install steps in this procedure. Install the exhaust pipe to the turbocharger turbine outlet and tighten the clamp. See the Install step in this procedure. Install the intake pipe to the turbocharger compressor inlet and tighten the clamp. See the Install step in this procedure. Preparatory Steps Remove the air crossover if equipped. Refer to Procedure 010-019.

Disconnect the charge air cooler hose. Refer to the OEM service manual. Remove the oil supply line from the turbocharger. Refer to Procedure 010-046. Remove the oil drain line from the turbocharger. Refer to Procedure 010-045. Remove the intake manifold pressure supply line from the boost capsule, if equipped. Remove Remove the exhaust piping. Remove the turbocharger compressor air inlet pipe.