Cummins — 3666003

Turbocharger C Series Page 10-20 Section 10 - Air Intake System - Group 10 Remove the turbocharger compressor outlet elbow, v- band clamp, and o-ring from the turbocharger compressor outlet. Remove the four turbocharger mounting nuts. Remove the turbocharger and gasket. Clean and Inspect for Reuse Clean the turbocharger and exhaust manifold gasket surfaces. Inspect the turbocharger and exhaust manifold gasket surfaces, and mounting studs for cracks and damage. Replace the turbocharger if any cracks are found on the mounting flange surface. See the Remove and Install steps in this procedure. Replace the exhaust manifold if any cracks are found on the mounting flange surface.

Refer to Procedure 011-007.