C Series Turbocharger Section 10 - Air Intake System - Group 10 Page 10-21 When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury. WARNING When using a steam cleaner, wear safety glasses or a face shield, as well as protective clothing. Hot steam can cause serious personal injury. WARNING Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury. WARNING Remove all carbon deposits and gasket material from surfaces (1, 2, and 3). Use solvent or steam to clean the exterior of the turbocharger.
Dry with compressed air. Inspect the turbine and compressor housings. If cracks that go all the way through the outer walls are found, the turbocharger must be replaced. NOTE: A charge air cooler failure can cause progressive damage to the turbine housing. If the turbine housing is damaged, check the charge air cooler. Refer to Procedure 010-027. NOTE: If the engine experiences a turbocharger failure or any other occasion where oil or debris is put into the charge air system, the charge air system must be inspected and cleaned. Refer to Procedure 010-027.