Cummins — 3666003

Turbocharger C Series Page 10-22 Section 10 - Air Intake System - Group 10 Install Apply a film of high-temperature anti-seize compound to the turbocharger mounting studs. Use a new gasket and install the turbocharger. Install and tighten the four mounting nuts. NOTE: The torque values given have been established using anti-seize compound as a lubricant. Torque Value: 45 N•m [ 33 ft-lb ] Install the turbocharger compressor outlet elbow, v-band clamp, and new o-ring seal on the turbocharger compressor discharge outlet. Tighten the clamp. Torque Value: 8 N•m [ 71 in-lb ] Install the intake pipe to the turbocharger compressor inlet and tighten the clamp.

Install the exhaust pipe to the turbocharger turbine outlet and tighten the clamp. Torque Value: 8 N•m [ 71 in-lb ] Torque Value: 8 N•m [ 71 in-lb ] Prime Install the turbocharger oil drain line. Refer to Procedure 010-045.