C Series Turbocharger Oil Supply Line Section 10 - Air Intake System - Group 10 Page 10-25 Install Push the drain line into the drain line boss. Be sure both o-rings are completely seated in the bore. Apply a thin film of oil to the drain line o-rings. Install a new gasket. Install and tighten the turbocharger oil drain line. Torque Value: 27 N•m [ 20 ft-lb ] Operate the engine and check for leaks. Turbocharger Oil Supply Line (010-046) Initial Check Inspect the line for oil leaks or damage. Replace as necessary. Remove Remove the oil supply line from the oil filter head (1). Remove the oil supply line from the turbocharger bearing housing (2).
Inspect for Reuse Inspect the line for cracks, wear, and damage. Inspect o-rings for cracking and fretting. Replace as necessary.