Intake Manifold Air Heater Control Module C Series Page 10-38 Section 10 - Air Intake System - Group 10 Install Install new gaskets and the intake manifold heater. Install the four capscrews and the single black (ground) heater lead. Install the intake manifold heater leads on the terminals. Intake Manifold Air Heater Control Module (010-125) Initial Check Connect the positive lead of the multimeter to the heater terminals. Ground the negative lead to the engine block. Clamp the ammeter current probe around both wires to the air heater. Attach a multimeter to the heater wires. Turn the keyswitch to the ON position, but do not start the engine.