Cummins — 3666003

Intake Manifold Air Heater Speed Sensor C Series Page 10-46 Section 10 - Air Intake System - Group 10 Test Check the solenoid for proper operation. Connect an multimeter to the two large terminals. Ground one of the small terminals to the battery ground. Apply system voltage to the other small terminal. The multimeter should indicate zero ohms. If the multimeter detects an open circuit, replace the solenoid. Reconnect the ground cable to the battery terminal. Intake Manifold Air Heater Speed Sensor (010-127) Initial Check There are two connections coming from the sensor, one is for the engine tachometer and the other is for the air intake heater system. 1. White and green:

to engine wiring harness 2. Red and black: to air heater control harness. Check to verify they are connected.