C Series Air Compressor Carbon Buildup Section 12 - Compressed Air System - Group 12 Page 12-1 Air Compressor Carbon Buildup (012-003) Measure Shut off the engine. Open the draincock on the wet tank to release compressed air from the system. WARNING Wear safety glasses or a face shield, as well as protective clothing, to prevent personal injury when using a steam cleaner or high-pressure water. Steam-clean the air compressor. Wear appropriate eye and face protective when using compressed air. Flying debris and dirt can cause bodily injury. WARNING Use compressed air to dry the air compressor. Remove the air inlet and outlet connections from the air compressor.
Measure the total carbon deposit thickness inside the air discharge line as shown. Air Compressor Discharge Line Carbon Deposits mm in 1.6 MAX 0.063 NOTE: If the total carbon deposit (x) exceeds the specifications, clean and inspect the cylinder head, valve assembly, and discharge line. Replace if necessary. Contact your Cummins Authorized Repair Location for procedures.