C Series Air Compressor Section 12 - Compressed Air System - Group 12 Page 12-5 Remove Remove the air compressor support brackets and capscrews. Remove the two capscrews and the air compressor. Clean and Inspect for Reuse Inspect the compressor housing for cracks or other damage. Inspect the drive gear for cracks or other damage. Make sure the gasket surfaces of the front gear housing and air compressor are clean and not damaged. Inspect the air compressor adapter at the rear of the air compressor. Replace the adapter, if worn. Use air compressor adapter replacer, Part Number 3165101, for 11-tooth adapters or air compressor adapter replacer, Part Number 3165102, for 13-tooth adapters.