Cummins — 3666003

C Series Air Compressor Section 12 - Compressed Air System - Group 12 Page 12-7 Use ink or dykem to mark the air compressor gear face at TDC (12-o'clock position when viewed from the front). Rotate the compressor TDC mark to 60 degrees, or six teeth on a 36-tooth gear, before TDC. This is approximately 10-o'clock when viewed from the front of the air compressor. Install the air compressor and new gasket to the gear housing. Torque Value: 77 N•m [ 57 ft-lb ] Install the brace to the air compresor. Tighten the capscrews. Torque Value: 43 N•m [ 32 ft-lb ]