C Series Charging System Indicator Section 13 - Electrical Equipment - Group 13 Page 13-13 Install Install the starter motor. Torque Value: 43 N•m [ 32 ft-lb ] Connect all cables and all other wires connected to the starter. Finishing Steps WARNING Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. Connect the ground cable from the battery terminal. Charging System Indicator (013-023) Initial Check Be sure the correct terminals are being used on the alternator.
The R terminal (Delco®) or W terminal (Bosch® K1) provide half of the system voltage and is used to operate accessories such as the tachometer on generator sets. Trouble with the starting system can be indicated by the indicator lamp or ampmeter.