Cummins — 3666003

C Series Engine Testing (Chassis Dynamometer) Section 14 - Engine Testing - Group 14 Page 14-3 While operating the chassis dynamometer, follow the general safety precautions listed below: Use tires that have more than 160 km [100 mi] of use. Do not use new tires. Do not use recapped tires or tires of different sizes or designs. Make sure the tires are inflated to the manufacturer's specifications. Remove all rocks or other materials from the treads of the tires that will be rotating on the dynamometer rollers. Make sure there is correct overhead clearance for exhaust stacks, air deflectors, or other attachments above the cab.

To prevent damage to the chassis dynamometer, make sure there is enough slack in the tie-down chains. CAUTION Carefully position the vehicle on the rollers. Attach the tie-down chains to the rear of the vehicle. Place wheel chocks in front of the front tires.