Engine Run-in (Chassis Dynamometer) C Series Page 14-8 Section 14 - Engine Testing - Group 14 Engine Run-in (Chassis Dynamometer) (014-003) Test CAUTION Refer to General Engine Test Procedures - (Chassis Dynamometer) ( 014-002) before operating the engine to avoid internal component damage. NOTE: Operate the vehicle in a gear that produces a road speed of 90 to 95 km/h [55 to 60 mph]. Operate the engine at 1200 rpm and 25 percent of torque peak load until the water temperature reaches 70°C [160°F]. Check all of the gauges, and record the readings. Operate the engine at 1200 rpm and 40 percent of torque peak load for 2 minutes. Check all of the gauges, and record the readings.
Operate the engine at 1600 rpm and 65 percent of torque peak load for 5 minutes. Check all of the gauges, and record the readings.