Cummins — 3666003

Engine Run-in (Without Dynamometer) C Series Page 14-10 Section 14 - Engine Testing - Group 14 Off-Highway Applications CAUTION Refer to Chassis Dynamometer - General Engine Test before operating the engine to avoid internal component damage. Operate the engine as follows during the first 3 hours after rebuild: 1. Do not idle the engine for more than 5 minutes at any one time. 2. Operate the engine at 75-percent throttle while loaded. 3. Do not operate the engine at rated speed (rpm) and full load for more than 5 minutes at any one time. Change the lubricating oil and oil filter after 800 km [500 mi] or 20 hours of operation; refer to Procedure 007-037.