Engine Compression C Series Page 14-44 Section 14 - Engine Testing - Group 14 Intake and Exhaust Valve Sealing If the compression is low on one or more non-adjacent cylinders and the pressure can not be increased by oiling the rings, poor valve sealing is to be suspected. Refer to Procedure 007-009 for cylinder head replacement. Valve leakage is often audible from the intake and exhaust manifold. Cylinder Head Gasket Sealing If the compression is low on adjacent cylinders and the pressure can not be increased by oiling the rings, the cylinder head gasket is probably leaking between the cylinders. Refer to Procedure 007-009 for cylinder head gasket replacement. NOTE:
Low compression on a single cylinder can be caused by an external leak to a coolant passage. A leak to a coolant passage of this magnitude will also result in coolant in the cylinder.