Cummins — 3666003

C Series Flywheel Section 16 - Mounting Adaptations - Group 16 Page 16-9 The component weighs 23 kg [51 lb] or more. To reduce the possibility of personal injury, use a hoist or get assistance to lift the component. WARNING Inspect the rear face of crankshaft and flywheel mounting flange for cleanliness and raised nicks or burrs. Install the flywheel on the guide pins. Lubricate the threads of the capscrews and the surface of the washers with clean lubricating engine oil. Install the six capscrews. Remove the t-handles and guide pins. Install the remaining capscrews into the holes from which the guide pins were removed.

Barring Tool, Part Number 3824591 Hold the crankshaft when tightening the flywheel capscrews. Tighten the capscrews in a star pattern. Refer to the equipment manufacturer's procedures to install the transmission. Torque Value: 137 N•m [ 101 ft-lb ]