Fuel system Wait at least 2 minutes to ensure the filter housings have drained properly. On the pressure filter: Unscrew the filter cov- er and lift it up slowly with the filter element. On the water separating suction filter: Un- screw the filter cover and lift it up slowly with the filter element. The remaining fuel will drain out of fuel filter housing automatically once the filter elements have been removed. 3. Check that no fuel or particles remain in the bottom of the filter housings. Draw off re- maining fuel and any particles. IMPORTANT! It is important to remove remaining fuel and par- ticles from the filter housings to prevent fuel sys- tem contamination. 4.
Undo the old filter elements from the covers by carefully bending them to one side. 5. Close the draining nipple. 6. Open the shut-off valve between the fuel tank and the fuel filter housing if it has been closed. 00:23-02 en-GB 38 © Scania CV AB 2016, Sweden