honda — 2000 -1996

9. Install the undercover. Tightening torque of 5 x 10 screw washer: 4.5 Nm 10. Check that the tube does not interfere with the undercover. 11. Reconnect the battery terminals removed for preparation work. Pass the carburettor drain tube between the fuel tube B and fuel Do not block the water pilot tube. (Avoid blockage by taking a large bend radius by passing the tube under the chamber.) 8. Connect the fuel connector from the fuel tank before installing the rear undercover. Check for fuel leakage from each joint of the tube by supplying fuel with the priming pump.