honda — 2000 -1996

7 Step 3-2. Put the corrugated tube (detached one) around the harness. 4b 4a Step 4. Detach the injector and P/REG from the current delivery pipe and fit them to the new delivery pipe. Torque the P/REG to 9.8 to 14N•m (Ensure that the O-rings for the injector and the P/REG are new ones and that new oil is applied to the O-rings.) Step 5. Detach the grommet collars from the current dismounted VSP and fit them to the new VSP. Step 6. Attach the water tube. Step 6a Replace this tube. 4b 4a 4b 4a